Tech-source Raptor Drivers for Linux Instrukcja Użytkownika Pobierz pdf (Strona 22)

Raptor Drivers for Linux Installation and Reference Manual

3-8

3.6.4 ServerLayout Section

This is the section which specifies the server layout for either

single-screen or multi-screen configuration.

This section is not modified automatically by the installation. It

must be modified for your specific configuration.

The following example shows the ServerLayout Section for a

single-screen configuration on the Raptor device.

Section "ServerLayout"

Identifier "XFree86 Configured"

Screen 0 "Raptor2000" 0 0

InputDevice "Mouse0" "CorePointer"

InputDevice "Keyboard0" "CoreKeyboard"

EndSection

Assuming Screen0 is the console card, the following example

shows the ServerLayout section with the Raptor card as the

second screen.

Section "ServerLayout"

Identifier "XFree86 Configured"

Screen 0 "Screen0" LeftOf "Raptor2000"

Screen 1 "Raptor2000" RightOf "Screen0"

InputDevice "Mouse0" "CorePointer"

InputDevice "Keyboard0" "CoreKeyboard"

EndSection

NOTE: The ServerLayout section should already exist in

your XF86Config file. It must be modified manually to

include the Raptor card.

NOTE: For the Raptor Drivers to work properly, NO othe

cards using the XF86 i128 driver should be specified in

the ServerLayout section. This limitation is due to the

fact that the XF86 i128 driver will claim all i128 based

cards. Since the i128 driver will not initialize the Rapto

card correctly, the Tech Source driver must be used.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 63 64

Brak uwag

Tech-source Raptor Drivers for Linux Instrukcja Użytkownika Strona 22