Tech-source Raptor Drivers for Linux Instrukcja Użytkownika Pobierz pdf (Strona 20)

Raptor Drivers for Linux Installation and Reference Manual

3-6

3.6.1 Monitor Section

This section for Raptor cards should remain unchanged.

3.6.2 Device Section

Identifier: Each Raptor card instance should have a

unique identifier. This identifer is used in the

Screen section.

NOTE: The BusID value in the configuration file must be

changed manually. Please see the description below for details.

BusID: Depending on the machine and the slot the

card is in, it might receive a unique BusID.

When the driver attaches, it will print out the

device name and BusID. To check the

BusID, type dmesg|grep rap. The

output should look similar to the following:

TSI: rapqfp0 (BusID 0:9:0) is

Raptor 2500 @ 2560x2048

TSI: raptor0 (BusID 0:10:0) is

Raptor 2000 @ 2048x2048.

In the example above, the Raptor 2000 has

a BusID of PCI:0:10:0, while the Raptor

2500 has a BusID of PCI:0:9:0. Change

the BusIDs of the cards in XF86Config to

match the BusIDs reported by the drivers.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 63 64

Brak uwag

Tech-source Raptor Drivers for Linux Instrukcja Użytkownika Strona 20